mb005s - mb10s surface mount bridge rectifiers prv : 50 - 1000 volts io : 1.0 ampere features : * high current capability * high surge current capability * high reliability * low reverse current * low forward voltage drop * ideal for printed circuit board * pb / rohs free mechanical data : * case : molded plastic * epoxy : ul94v-o rate flame retardant * terminals : plated lead solderable per mil-std-750, method 2026 * polarity : polarity symbols marked on body * mounting position : any * weight : 0.4 gram maximum ratings and electrical characteristics rating at 25 c ambient temperature unless otherwise specified . 60 hz, resistive or inductive load. symbol mb005smb01 mb02 mb04 mb06 mb08smb10 unit maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward output rectified current at ta = 40 c maximum peak forward surge current single half sine wave superimposed on rated load (jedec method) current squared time at t < 8.3 ms. i 2 t 10 a 2 s maximum instantaneous forward voltage per element at if = 1.0 a maximum dc reverse current ta = 25 c i r 10 m a at rated dc blocking voltage ta = 125 c i r(h) 500 m a typical junction capacitance per element (note 1) cj 25 pf typical thermal resistance (note 2) r q ja 40 c/w junction and storage temperature range t j , t stg - 55 to + 150 c notes : (1) measured at 1.0 mhz and applied reverse voltage of 4.0vdc (2) thermal resistance from junction to ambient on p.c.b. with 0.5" x 0.5" (13mm x 13mm) copper pads. page 1 of 2 a v f 1.1 v a rating i f(av) i fsm 1.0 50 dimensions in inches and ( millimeters ) dfs 0.047(1.20) 0.040(1.02) 0.404(10.3) 0.386(9.80) 0.335(8.51) 0.320(8.13) 0.255(6.5) 0.245(6.2) 0.122(3.1) 0.102(2.6) 0.060(1.524) 0.040(1.016) 0.013(0.330) 0.009(0.241) ~ ~ 0.205(5.2) 0.195(5.0)
rating and characteristic curves ( mb005s - mb10s ) fig.1 - derating curve for output fig.2 - maximum non-repetitive peak rectified current forward surge current per bridge element 0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100 ambient temperature, ( c) number of cycles at 60hz fig.3 - typical forward characteristics fig.4 - typical reverse characteristics per bridge element page 2 of 2 0.8 0.6 0.4 0.2 1.0 10 1.0 40 0 50 0 30 20 10 1 80 0.1 0.01 10 0.1 100 140 0 20 40 60 120 percent of rated peak reverse voltage, (%) peak forward surge current, amperes average forward output current, amperes forward current, amperes reverse current, microamperes t j = 25 c t j = 125 c 0.01 100 pulse width = 300 m s 2% duty cycle t j = 25 c single sine-wave (jedec method) t j = 150 c 60hz resistive or inductive load forward voltage, volts 0 .20 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
|
